I faced a similar issue. It seems that an update of meego-ivi-configs installs a file called screensaver.conf. That file contains a ServerLayout that overwrites yours defined in xorg.conf. As result you see that X fails because it cannot "AddScreen/ScreenInit". Remove/merge the screensaver.conf and your setup likely works. No need to update drivers.
From: meego-ivi-bounces-***@public.gmane.org [mailto:meego-ivi-bounces-***@public.gmane.org] On Behalf Of Matsumura, Ryan
To: VanCutsem, Geoffroy; O'carroll, David T; Wonmin Jung; meego-ivi-***@public.gmane.org
I tested out your xorg.conf and it seems to work fine so that's not the problem. I did upgrade to EMGD 1.8 with kernel version 2.6.37.6-10.1-adaptation-connext. I did see the same thing as you did on the EMGD 2027 version. Try upgrading to EMGD 1.8 via www.intel.com/embedded
From: meego-ivi-bounces-***@public.gmane.org [mailto:meego-ivi-bounces-***@public.gmane.org] On Behalf Of VanCutsem, Geoffroy
I have seen such failure too but thought it was somehow linked to me using a version of Qt compiled without xinput2 support. Can you just confirm which Qt version you are using in your image?
Post by Clark, Joel-----Original Message-----
Sent: Friday, July 29, 2011 12:44 PM
Subject: Re: [MeeGo-ivi] Any possible combination for dual head display?
Hey Wonmin,
Make sure you configure the board correctly.
1. Need to put 2 jumpers on JP21 in positions 7-8 and 9-10
2. If using VGA
configure the board by plug in J10 VGA cable into J10
Move the default display to digital RGB by removing jumper JP1 into pin position 2-3
Hope this helps,
Dave
-----Original Message-----
Sent: Friday, July 29, 2011 6:31 AM
Subject: Re: [MeeGo-ivi] Any possible combination for dual head display?
Hi,
I updated emgd-bin to version 2027, and test it again, but it still
fails to initialize display.
At this time, I saw following error on my Xorg.0.log file.
[ 591.477] AddScreen/ScreenInit failed for driver 0
I attached a configuration file I am using, and a log file.
I think my case is not relevant with QT issue, X isn't just
initializing properly.
Regards,
Wonmin
Wonmin Jung
Research Engineer
Automotive Operating Platform Group
Software Platform R&D Lab.
CTO Division
LG Electronics Inc.
C/P: 82-10-2793-5301
-----Original Message-----
Sent: Tuesday, July 26, 2011 11:39 PM
To: VanCutsem, Geoffroy; Richard Röjfors
Subject: Re: [MeeGo-ivi] Any possible combination for dual head display?
The dual-head EMGD fix does not depend on any kernel changes.
regards
Joel
-----Original Message-----
From: VanCutsem, Geoffroy
Sent: Tuesday, July 26, 2011 7:33 AM
To: Clark, Joel; Richard Röjfors
Subject: RE: [MeeGo-ivi] Any possible combination for dual head display?
Do you know if getting the latest emgd-bin package is sufficient or do
you need to upgrade your kernel too (for connext)?
Post by Clark, Joel-----Original Message-----
From: Clark, Joel
Sent: Tuesday, July 26, 2011 4:16 PM
To: Richard Röjfors; VanCutsem, Geoffroy
Subject: RE: [MeeGo-ivi] Any possible combination for dual head display?
That newer version of EMGD that fixes this is in the MeeGo IVI 1.2 update repos now.
https://meego.com/downloads/releases/updates/meego-v1.2.0.1-ivi-
update
Post by Clark, Joelregards
Joel
-----Original Message-----
Sent: Tuesday, July 26, 2011 6:16 AM
To: VanCutsem, Geoffroy
Subject: Re: [MeeGo-ivi] Any possible combination for dual head display?
Post by VanCutsem, GeoffroyThere is a known issue with MeeGo 1.0.1 (i.e. EMGD build 1742 +
kernel
Post by VanCutsem, Geoffroy2.6.33.5-23.1022-ivi) against dual-head display. You will need to
upgrade EMGD (and possibly the kernel/X stack) to get this working.
There is also an issue with MeeGo 1.2 if you run Qt windows using EGL
on the secondary screen. Which would require an even newer version of
EMGD.
--Richard
_______________________________________________
MeeGo-ivi mailing list
http://lists.meego.com/listinfo/meego-ivi
_______________________________________________
MeeGo-ivi mailing list
http://lists.meego.com/listinfo/meego-ivi
--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
_______________________________________________
MeeGo-ivi mailing list
http://lists.meego.com/listinfo/meego-ivi
RPM (Bruxelles) 0415.497.718.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.