Meego Respawing issue

[Mustansar Saeed]

Hi,

I am building MEEGO 1.2 UX, I am receiving following error due to which i
am unable to enter in UX gui:

init: id "x" respawing too fst: disabled for 5 minutes

Can any one please tell me what is causing this and how to resolve this?

Thanks in advance.

Best Regards

[Hahn, Matthias]

Looks like issues with grapics driver.
Which hw?
Can you send x log and xorg.conf?

-----Original Message-----
From: Mustansar Saeed [***@gmail.com<mailto:***@gmail.com>]
Sent: Saturday, May 12, 2012 08:18 AM GMT Standard Time
To: meego-***@lists.meego.com; Alison Chaiken
Subject: [MeeGo-ivi] Meego Respawing issue


Hi,

I am building MEEGO 1.2 UX, I am receiving following error due to which i am unable to enter in UX gui:

init: id "x" respawing too fst: disabled for 5 minutes

Can any one please tell me what is causing this and how to resolve this?

Thanks in advance.

Best Regards
--
Mustansar
--------------------------------------------------------------------------------------
Intel GmbH
Dornacher Strasse 1
85622 Feldkirchen/Muenchen, Deutschland
Sitz der Gesellschaft: Feldkirchen bei Muenchen
Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer
Registergericht: Muenchen HRB 47456
Ust.-IdNr./VAT Registration No.: DE129385895
Citibank Frankfurt a.M. (BLZ 502 109 00) 600119052

[Mustansar Saeed]

Thanks for replying.

I am using OMAP4430 based Pandaboard. I have not yet installed any graphics
driver.

Post by Hahn, Matthias
Looks like issues with grapics driver.
Which hw?
Can you send x log and xorg.conf?
-----Original Message-----
*Sent: *Saturday, May 12, 2012 08:18 AM GMT Standard Time
*Subject: *[MeeGo-ivi] Meego Respawing issue
Hi,
I am building MEEGO 1.2 UX, I am receiving following error due to which
init: id "x" respawing too fst: disabled for 5 minutes
Can any one please tell me what is causing this and how to resolve this?
Thanks in advance.
Best Regards
--
Mustansar
--------------------------------------------------------------------------------------
Intel GmbH
Dornacher Strasse 1
85622 Feldkirchen/Muenchen, Deutschland
Sitz der Gesellschaft: Feldkirchen bei Muenchen
Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer
Registergericht: Muenchen HRB 47456
Ust.-IdNr./VAT Registration No.: DE129385895
Citibank Frankfurt a.M. (BLZ 502 109 00) 600119052

[martin brook]

Mustansar HI,
I am using OMAP4430 based Pandaboard. I have not yet installed any
graphics driver.
MeeGo 1.2 was only built for ARM Hard floating point ABI so you would need

hard floating point drivers for Panda to take advantage of the hardware
acceleration.

I've been dong some work to port the 1.2 IV reference UX to Mer for hard
and soft ABI and I'm using Pandaboard.

The work is going on at
https://build.pub.meego.com/project/monitor?project=home%3Avgrade%3Aivi and
is utilising the Mer Pandaboard device adaptation packages at
https://build.pub.meego.com/project/monitor?arch_armv7el=1&defaults=0&project=home%3Asage%3Abranches%3ACE%3AAdaptation%3APandaBoard&repo_Mer_Core_armv7l=1&succeeded=1

Currently I have it booting to the UX and plan to get more of the apps
building.

http://t.co/5PW40CkE

BR

vgrade

[Clark, Joel]

The error:
"init: id "x" respawing too fst: disabled for 5 minutes"

is typically seen in MeeGo 1.2 when starting the UX and the X11 subsystem keeps dying because it can't find a working graphics driver for the hardware platform it is on.

regards
Joel


From: meego-ivi-bounces-***@public.gmane.org [mailto:meego-ivi-bounces-VVXm0OgCXj2zQB+***@public.gmane.orggo.com] On Behalf Of Mustansar Saeed
Sent: Saturday, May 12, 2012 1:11 AM
To: Hahn, Matthias
Cc: meego-ivi-***@public.gmane.org; Alison Chaiken
Subject: Re: [MeeGo-ivi] Meego Respawing issue

Thanks for replying.

I am using OMAP4430 based Pandaboard. I have not yet installed any graphics driver.

On Sat, May 12, 2012 at 12:56 PM, Hahn, Matthias <matthias.hahn-***@public.gmane.org<mailto:matthias.hahn-***@public.gmane.org>> wrote:
Looks like issues with grapics driver.
Which hw?
Can you send x log and xorg.conf?


-----Original Message-----
From: Mustansar Saeed [m.mustansar.saeed-***@public.gmane.org<mailto:***@gmail.com>]
Sent: Saturday, May 12, 2012 08:18 AM GMT Standard Time
To: meego-ivi-***@public.gmane.org<mailto:meego-ivi-***@public.gmane.org>; Alison Chaiken
Subject: [MeeGo-ivi] Meego Respawing issue


Hi,

I am building MEEGO 1.2 UX, I am receiving following error due to which i am unable to enter in UX gui:

init: id "x" respawing too fst: disabled for 5 minutes

Can any one please tell me what is causing this and how to resolve this?

Thanks in advance.

Best Regards
--
Mustansar
--------------------------------------------------------------------------------------
Intel GmbH
Dornacher Strasse 1
85622 Feldkirchen/Muenchen, Deutschland
Sitz der Gesellschaft: Feldkirchen bei Muenchen
Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer
Registergericht: Muenchen HRB 47456
Ust.-IdNr./VAT Registration No.: DE129385895
Citibank Frankfurt a.M. (BLZ 502 109 00) 600119052



--
Mustansar

[Vishnuchakravarthi Nagarajan]

Hello,

It sounds like graphics driver issue. I assumed you are able login to
terminal mode.

Please try the listed steps below,

copy "/usr/share/doc/emgd-bin-xxxx/emgd-cb.conf" as
"/etc/xorg/xorg.conf" and restart
If this does not work please try copying
"/usr/share/doc/emgd-binxxxx/emgd-rv.conf" as "/etc/xorg/xorg.conf"

If both of the above are not working, you may have to install graphics
drivers from below link, if nothing above works
http://repo.meego.com/MeeGo/releases/1.2.0/repos/oss/ia32/packages/i586/
(As per the required board configuration)

--
**

*Best Regards, *

*Vishnuchakravarthi Nagarajan*

*Transportation BU | Infotainment & Telematics *

*TATA ELXSI*-*Engineering****Creativity* <http://www.tataelxsi.com/>

Tel [phone] Cell [phone]

Post by Clark, Joel
"init: id "x" respawing too fst: disabled for 5 minutes"
is typically seen in MeeGo 1.2 when starting the UX and the X11
subsystem keeps dying because it can't find a working graphics driver
for the hardware platform it is on.
regards
Joel
*Sent:* Saturday, May 12, 2012 1:11 AM
*To:* Hahn, Matthias
*Subject:* Re: [MeeGo-ivi] Meego Respawing issue
Thanks for replying.
I am using OMAP4430 based Pandaboard. I have not yet installed any graphics driver.
On Sat, May 12, 2012 at 12:56 PM, Hahn, Matthias
Looks like issues with grapics driver.
Which hw?
Can you send x log and xorg.conf?
-----Original Message-----
*Sent: *Saturday, May 12, 2012 08:18 AM GMT Standard Time
Alison Chaiken
*Subject: *[MeeGo-ivi] Meego Respawing issue
Hi,
I am building MEEGO 1.2 UX, I am receiving following error due to
init: id "x" respawing too fst: disabled for 5 minutes
Can any one please tell me what is causing this and how to resolve this?
Thanks in advance.
Best Regards
--
Mustansar
--------------------------------------------------------------------------------------
Intel GmbH
Dornacher Strasse 1
85622 Feldkirchen/Muenchen, Deutschland
Sitz der Gesellschaft: Feldkirchen bei Muenchen
Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer
Registergericht: Muenchen HRB 47456
Ust.-IdNr./VAT Registration No.: DE129385895
Citibank Frankfurt a.M. (BLZ 502 109 00) 600119052
--
Mustansar
_______________________________________________
MeeGo-ivi mailing list
http://lists.meego.com/listinfo/meego-ivi

[Clark, Joel]

The EMGD.bin graphics driver won't work on his Pandaboard.

From: Vishnuchakravarthi Nagarajan [mailto:vishnuchakra-Ig93jE4/***@public.gmane.org]
Sent: Sunday, May 13, 2012 9:45 PM
To: Mustansar Saeed
Cc: Clark, Joel; Hahn, Matthias; meego-ivi-***@public.gmane.org; Alison Chaiken
Subject: Re: [MeeGo-ivi] Meego Respawing issue

Hello,

It sounds like graphics driver issue. I assumed you are able login to terminal mode.

Please try the listed steps below,

copy "/usr/share/doc/emgd-bin-xxxx/emgd-cb.conf" as "/etc/xorg/xorg.conf" and restart
If this does not work please try copying "/usr/share/doc/emgd-binxxxx/emgd-rv.conf" as "/etc/xorg/xorg.conf"

If both of the above are not working, you may have to install graphics drivers from below link, if nothing above works
http://repo.meego.com/MeeGo/releases/1.2.0/repos/oss/ia32/packages/i586/ (As per the required board configuration)

--
Best Regards,

Vishnuchakravarthi Nagarajan
Transportation BU | Infotainment & Telematics
TATA ELXSI - Engineering Creativity<http://www.tataelxsi.com/>

Tel [phone] Cell [phone]





On 5/12/2012 9:11 PM, Clark, Joel wrote:
The error:
"init: id "x" respawing too fst: disabled for 5 minutes"

is typically seen in MeeGo 1.2 when starting the UX and the X11 subsystem keeps dying because it can't find a working graphics driver for the hardware platform it is on.

regards
Joel


From: meego-ivi-bounces-***@public.gmane.org<mailto:meego-ivi-bounces-***@public.gmane.orgo.com> [mailto:meego-ivi-bounces-***@public.gmane.org] On Behalf Of Mustansar Saeed
Sent: Saturday, May 12, 2012 1:11 AM
To: Hahn, Matthias
Cc: meego-ivi-***@public.gmane.org<mailto:meego-ivi-***@public.gmane.org>; Alison Chaiken
Subject: Re: [MeeGo-ivi] Meego Respawing issue

Thanks for replying.

I am using OMAP4430 based Pandaboard. I have not yet installed any graphics driver.

On Sat, May 12, 2012 at 12:56 PM, Hahn, Matthias <matthias.hahn-***@public.gmane.org<mailto:matthias.hahn-***@public.gmane.org>> wrote:
Looks like issues with grapics driver.
Which hw?
Can you send x log and xorg.conf?


-----Original Message-----
From: Mustansar Saeed [m.mustansar.saeed-***@public.gmane.org<mailto:***@gmail.com>]
Sent: Saturday, May 12, 2012 08:18 AM GMT Standard Time
To: meego-ivi-***@public.gmane.org<mailto:meego-ivi-***@public.gmane.org>; Alison Chaiken
Subject: [MeeGo-ivi] Meego Respawing issue


Hi,

I am building MEEGO 1.2 UX, I am receiving following error due to which i am unable to enter in UX gui:

init: id "x" respawing too fst: disabled for 5 minutes

Can any one please tell me what is causing this and how to resolve this?

Thanks in advance.

Best Regards
--
Mustansar
--------------------------------------------------------------------------------------
Intel GmbH
Dornacher Strasse 1
85622 Feldkirchen/Muenchen, Deutschland
Sitz der Gesellschaft: Feldkirchen bei Muenchen
Geschaeftsfuehrer: Douglas Lusk, Peter Gleissner, Hannes Schwaderer
Registergericht: Muenchen HRB 47456
Ust.-IdNr./VAT Registration No.: DE129385895
Citibank Frankfurt a.M. (BLZ 502 109 00) 600119052



--
Mustansar





_______________________________________________

MeeGo-ivi mailing list

MeeGo-ivi-***@public.gmane.org<mailto:MeeGo-ivi-***@public.gmane.org>

http://lists.meego.com/listinfo/meego-ivi